Q & A

Welcome to the Planet Natural Garden Forum! Whether you’re new to gardening or have been at it for some time, here you can search existing messages for answers to your questions or post a new message for others to reply to. If this is your first visit, please read over our forum instructions carefully before posting. Enjoy!

  • How does a plant EZ Clone machine work?

    Created by Greg on

    I am interested in the EZ Clone 9 unit. What else is needed to successfully operate the aeroponic system? Do you have instructions for plants?

  • Author
    Posts
  • #293019

    Eric Vinje
    Keymaster

    Hi Greg –

    EZ-Clone machines ship complete and are ready to use right out of the box. Here’s how to use this aeroponic plant cloning machine.

    EZClone is designed to be used in a temperature controlled room, preferably between 65 and 75ËšF. The temperature of your water should remain between 68 and 72ËšF.

    EZ-CLONE works very well with a rooting hormone gel like Clonex®. It should be applied directly to the cutting’s stem prior to placing the cutting in the system.

    Place cutting in the center of the circular neoprene collars. Make sure that at least 1-1/2 to 2 inches of the cutting is suspended beneath the lid. All leaves should remain on the top of the lid.

    Insert the neoprene collars, each filled with a cutting, into the lid. Make sure they are fitted securely to prevent leakage.

    Set the lid onto the reservoir making sure that the lid is securely seated to prevent leakage.

    Plant cloning systems work best with a fluorescent light. We recommend a 2 or 4 foot T5 fluorescent placed 8 to 12 inches above the cuttings.

    Finally, sit back and let the system make this your easiest cloning experience ever.

    Hope it helps!

You must be logged in to reply to this topic.