Juliana Greenhouse - Frame Assembly
 Before you assemble your new greenhouse, please read the instructions carefully.
It is possible to assemble a greenhouse by yourself, but it's a good idea to have at least one other person, especially when attaching the sides and gables.
Allow one day to assemble the frame.
The pictures below show how to assemble a Juliana Premium. However, all greenhouses are assembled in a similar way. |
 |
 |
The frame is packed in a box (some models in several boxes)
Before you unpack them please check that you have the right parts. |
Start by assembling the gables
Lay the parts on the ground before putting them together to get an overview.
Put the parts together following the order shown in the instructions. |
 |
 |
| Put the gables aside once they are assembled. |
Assemble the sides the same way as the gables. |
 |
 |
Assemble the sides and gables on a level foundation. When they are assembled lift them up onto the base.
If you do not have enough room, you can assemble the kit directly on the base.
It is a good idea to loosen the bolts in the gable when you fix it to the sides. In this way the corners will be correctly assembled. |
If you have purchased a Juliana galvanized steel base, you must fasten the greenhouse to the base using j-plates. The small bow are pushed under the base and fastened to the greenhouse bolt through the long hole.
If you have a concrete or wooden base, the greenhouse must be fasten to it with a screw for every section in the greenhouse. |
 |
 |
| Now assemble the ridge. Loosen the bolts in the top of the gable, to make assembly easier. |
The roof profiles are assembled.
Remember to add extra bolts, where you want to mount the windows. |
 |
 |
Now its time to assemble the windows.
With the Premium model you assemble the window frames around the polycarbonate.
With other models you assemble the window frames and mount them before installing the polycarbonate using silicone. |
The hinges of the windows are pushed into the ridge from the end and pushed into position.
It will move more easily if you oil it. |
 |
 |
Now it is time to put the door together.
The Premium door is assembled around the polycarbonate.
With other greenhouses the door is assembled first and then the polycarbonate is installed using silicone. |
Before you assemble the door, window and polycarbonate it is very important that you ensure your greenhouse is level.
Further it is important to measure from one corner to the opposite corner to ensure that the greenhouse is in 90 degrees angle. |
 |
|
Install the greenhouse door.
Now install the polycarbonate. |
|
