High Load Light Timers

These Light Timers are designed to operate high load lighting equipment. They consist of a premium quality precision synchronous clock motor and a high amperage switching circuit. All Green Air Products controllers are housed in black anodized brush finish aluminum enclosures which can not break, chip or corrode. Operates with a maximum combined outlet switching capacity of 40 amps. Plug or wire the power cord into a receptacle capable of handling the maximum total combined amperage draw of your equipment load. Make certain that the receptacle, wiring and circuit breaker are adequate and properly suited for this application. Plug lighting equipment into outlet receptacles located on each side of controller. Turn clock dial to current time of day. AM and PM is indicated by colored ring on dial face. Push all trippers toward the center of the dial for "On" time and leave in the outward position for "Off" period. Timer has 96 non-detachable 15 minute on\off trippers.

LT4-120 - Four 5 amp 120 volt outlet receptacles, each capable of powering up to 1000 watts of lighting equipment.
LT4-240 - Four 5 amp 240 volt outlet receptacles, each capable of powering up to 1000 watts of lighting equipment.
LT8-240 - Eight 5 amp 240 volt outlet receptacles, each capable of powering up to 1000 watts of lighting equipment.

If your application requires separate relay and timers click here for an illustration that demonstrates the use of a high amperage relay.