CO2 Generators

The burners used in Green Air CO2 Generators are specially designed to maximize the production of carbon dioxide and minimize heat as a by-product. This generator provides carbon dioxide far more economically than any other means of enrichment. A constant burning pilot is used to ignite the gas when the generator is turned on. A thermocouple is used to monitor the pilot flame. If the pilot flame is lost, a safety valve will close so that unburned fuel will not be released into the enclosure. CO2 Generator operations may be automatically functioned according to actual ambient values when installed in conjunction with the CDMC-6 or 7. This control device continually samples the level of carbon dioxide in the growing area and functions the generator whenever CO2 levels do not meet your predetermined values. Generators are easily installed, dependable and efficient. Transformer included. Black anodized aluminum housing will not rust or corrode. Operates on 110 VAC. Available in both natural gas (NG) and liquid propane (LP) versions.

The method, timing, and size of generator must be properly determined to provide maximum benefits and economy. Carefully follow the operation charts to choose the proper size generator for the cubic foot area. Keep the recharge times to a minimum for best results. Do not under-size the generator or optimum results may never be achieved.

Available Sizes:
CD-3 - covers 3 cu. ft. per hour
CD-6 - covers 6 cu. ft. per hour
CD-12 - covers 12 cu. ft. per hour
CD-36 - covers 24 cu. ft. per hour

Note: Designate your preference of propane (LP) or natural gas (NG) as a suffix to the model number (example CD-3LP).