 Operates up to 100° F cooler than other brands! The C.A.P. GEN-1 CO2 Generator is constructed with a powder coated steel enclosure that resists moisture, rust and discoloration.
Comes complete with a low-pressure, in-line natural gas (NG) regulator or the new Type1 style "no-tool-required" propane (LP) regulator that makes tank replacement easy.
Features a two-stage safety pilot valve, which will not allow fuel to flow to the burner unless the pilot is lit, and a standard tip-switch that will shut down the fuel to the main burner in the event the unit falls or tips over.
Manufactured in the USA using only AGA and/or UL listed components. 5-year no hassle warranty. Dimensions: 17" H x 11" W x 8.5" D.
The GEN-1 is capable of producing between 3 and 13 cubic feet of CO2 per hour and is recommended for small to medium size areas up to 15' x 15'. It comes standard with one burner, producing approximately 3 cubic feet per hour.
The GEN-1e has a pilot-less electronic ignition, instead of the traditional "pilot light," and comes standard with 2 burners, producing approximately 6 cubic feet of CO2 per hour.
Both units can be expanded to a maximum of 4 burners (sold separately), increasing their capacity up to approximately 13 cubic feet of CO2 per hour (each burner increases the CO2 generating capacity by approximately 3 cubic feet per hour).
Note: Special high altitude burners (above 3,500') are available, please ask.
GEN-1 Instruction Manual - PDF format
GEN-1e Instruction Manual - PDF format |
